Find answers to frequently asked questions about ReACT!’s features and functionalities.
This depends on your local server speed; however, in the majority of cases messages are communicated within 1 second. With an ACT-ONE Controller, activation time is less than 1 second.
A lockdown can be preprogrammed to activate as soon as an alert is issued. For example, if there is a shooting, ReACT! can show the alert message and lock the door at the same time.
An on-board backup battery powers the ReACT! in cases of power failures. The backup battery will power the ReACT! for 48 Hours on standby mode and 2 hours on Alert Mode.
Yes, ReACT! can be powered by POE, making installation fast and easy.
ReACT! can be ordered with Wi-Fi. In the event that the Ethernet cable is disconnected, Wi-Fi will immediately pick up the connection.
Yes, there are 2 output relays. One for locking down a door and another that can be used to activate third-party equipment such as a siren or light.
Yes, a test mode is built into the ReACT! for system testing and drills.
No. The ReACT! server and the alert buttons are built directly onto the ACT-ONE controller, so it is virtually plug and play out of the box.
In most cases, it takes less than one second.
Yes, this can easily be done through our API if there is no ACT-ONE controller. If you have an ACT-ONE controller, it’s a lot easier. Simply connect one of the output relays to your fire alarm system.
Yes, you can connect the fire alarm system to one of the input relays.
Yes, ReACT! provides an RS232 interface port. You can also order the ReACT! with an RS422 interface port.